Mach 0.3 Burner Rig Facility at the NASA Glenn Materials Research Laboratory

This Technical Memorandum presents the current capabilities of the state-of-the-art Mach 0.3 Burner Rig Facility. It is used for materials research including oxidation, corrosion, erosion and impact. Consisting of seven computer controlled jet-fueled combustors in individual test cells, these relatively small rigs burn just 2 to 3 gal of jet fuel per hour. The rigs are used as an efficient means of subjecting potential aircraft engine/airframe advanced materials to the high temperatures, high velocities and thermal cycling closely approximating actual operating environments. Materials of various geometries and compositions can be evaluated at temperatures from 700 to 2400 F. Tests are conducted not only on bare superalloys and ceramics, but also to study the behavior and durability of protective coatings applied to those materials

Air Flow and Pressure Drop Measurements Across Porous Oxides

This report summarizes the results of air flow tests across eight porous, open cell ceramic oxide samples. During ceramic specimen processing, the porosity was formed using the sacrificial template technique, with two different sizes of polystyrene beads used for the template. The samples were initially supplied with thicknesses ranging from 0.14 to 0.20 in. (0.35 to 0.50 cm) and nonuniform backside morphology (some areas dense, some porous). Samples were therefore ground to a thickness of 0.12 to 0.14 in. (0.30 to 0.35 cm) using dry 120 grit SiC paper. Pressure drop versus air flow is reported. Comparisons of samples with thickness variations are made, as are pressure drop estimates. As the density of the ceramic material increases the maximum corrected flow decreases rapidly. Future sample sets should be supplied with samples of similar thickness and having uniform surface morphology. This would allow a more consistent determination of air flow versus processing parameters and the resulting porosity size and distribution

ARIADNE: A Research Infrastructure for Archaeology

Research e-infrastructures, digital archives, and data services have become important pillars of scientific enterprise that in recent decades have become ever more collaborative, distributed, and data intensive. The archaeological research community has been an early adopter of digital tools for data acquisition, organization, analysis, and presentation of research results of individual projects. However, the provision of e-infrastructure and services for data sharing, discovery, access, and (re)use have lagged behind. This situation is being addressed by ARIADNE, the Advanced Research Infrastructure for Archaeological Dataset Networking in Europe. This EU-funded network has developed an e-infrastructure that enables data providers to register and provide access to their resources (datasets, collections) through the ARIADNE data portal, facilitating discovery, access, and other services across the integrated resources. This article describes the current landscape of data repositories and services for archaeologists in Europe, and the issues that make interoperability between them difficult to realize. The results of the ARIADNE surveys on users’ expectations and requirements are also presented. The main section of the article describes the architecture of the e-infrastructure, core services (data registration, discovery, and access), and various other extant or experimental services. The ongoing evaluation of the data integration and services is also discussed. Finally, the article summarizes lessons learned and outlines the prospects for the wider engagement of the archaeological research community in the sharing of data through ARIADNE

Community as an Institutional Learning Goal at the Unversity of Dayton

This working paper summarizes the work of the Habits of Inquiry and Reflection Community Fellows. It considers the meaning of community both in UD’s historic mission and in the ways it is practiced at UD now; identifies obstacles and failures; and offers recommendations for advancing community as a learning goal at UD

Enamel-like apatite crown covering amorphous mineral in a crayfish mandible

Carbonated hydroxyapatite is the mineral found in vertebrate bones and teeth, whereas invertebrates utilize calcium carbonate in their mineralized organs. In particular, stable amorphous calcium carbonate is found in many crustaceans. Here we report on an unusual, crystalline enamel-like apatite layer found in the mandibles of the arthropod Cherax quadricarinatus (freshwater crayfish). Despite their very different thermodynamic stabilities, amorphous calcium carbonate, amorphous calcium phosphate, calcite and fluorapatite coexist in well-defined functional layers in close proximity within the mandible. The softer amorphous minerals are found primarily in the bulk of the mandible whereas apatite, the harder and less soluble mineral, forms a wear-resistant, enamel-like coating of the molar tooth. Our findings suggest a unique case of convergent evolution, where similar functional challenges of mastication led to independent developments of structurally and mechanically similar, apatite-based layers in the teeth of genetically remote phyla: vertebrates and crustaceans

Protein disorder-order interplay to guide the growth of hierarchical mineralized structures

A major goal in materials science is to develop bioinspired functional materials based on the precise control of molecular building blocks across length scales. Here we report a protein-mediated mineralization process that takes advantage of disorder–order interplay using elastin-like recombinamers to program organic–inorganic interactions into hierarchically ordered mineralized structures. The materials comprise elongated apatite nanocrystals that are aligned and organized into microscopic prisms, which grow together into spherulite-like structures hundreds of micrometers in diameter that come together to fill macroscopic areas. The structures can be grown over large uneven surfaces and native tissues as acid-resistant membranes or coatings with tuneable hierarchy, stiffness, and hardness. Our study represents a potential strategy for complex materials design that may open opportunities for hard tissue repair and provide insights into the role of molecular disorder in human physiology and pathology

CBMS-GIS: Community-based monitoring system-geographic information system

The aim of the Community-Based Monitoring System (CBMS) is to design, implement, and pilot-test a methodology for data collection and data processing, validation and utilization of CBMS data for identification of needs. The CBMS also aims the designing and monitoring of program interventions which will provide the current information for policymaking and program implementation to the national and local government through the development and institutionalization of a CBMS. With the aid of an enhanced Geographic Information System (GIS) used by the CBMS Network, appropriate visual mapping of data and friendly user interface is made available to the users of the system. With the use of spatial analysis, additional information will be gathered, and georeferenced data will be analyzed and manipulated, and displayed that will help program planning and implementation in a desired area. Spatial relationships are analyzed to examine the interaction or the dependency of the variables